Tripp Lite by Eaton UPS SmartPro 120V 1.5kVA 1.44kW Line-Interactive Sine Wave UPS 2U Extended Run Network Card Options USB 8 Outlets

Protects Mission-Critical Rack-Mounted Equipment

• Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
• Audible alarm signals loss of utility power, overload and low battery
• 8 NEMA 5-15R outlets
• 10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
• 570-joule surge suppression rating

Reliable Battery Backup with Expandable Runtime

• Supports half load up to 14 min. and full load up to 6 min.
• Internal batteries designed for hot-swap field replacement
• 97% line-power efficiency rating saves money in energy costs
• Expandable runtime with optional external battery packs, such as Tripp Lite's BP48V24-2U

3 Load Banks with Switchable Outlets

• Can control 3 outlets remotely to reboot equipment or shed nonessential loads

Automatic Voltage Regulation (AVR)

• Maintains 120V nominal output over input range of 83V-145V without using battery power

EMI/RFI Line Noise Filtering

• Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance

LED Indicators

• Front-panel LEDs signal indicate line power, battery power, overload, voltage regulation and battery status

Network Management Cards

• Compatible with Tripp Lite UPS management card options WEBCARDLX and SNMPWEBCARD

Communications Ports

• USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from
• EPO">www.tripplite.com/poweralert port supports emergency shutdown in large facilities

• EPO">
  Versatile Installation Options
  

• EPO">
  • EPO">Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
  • EPO">Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory
  • EPO">Mounts in upright tower position with optional 2-9USTAND accessory
• EPO">

• EPO">

• SMART1500CRMXL 1500VA Tower/Rack-mountable UPS
• SmartPro compact rackmount UPS System
• 4-post rackmount installation hardware
• USB and serial cabling
• Owner's manual with warranty information

• Customized load management receptacles: 3 individually controllable single outlet load banks
• Includes RJ11 EPO (emergency power off) port and interconnection cable